Gas Warning Systems
Gas
Warning Systems
KO-Gas
Warning System
Gas-
and KO-Gas Warning Systems
Gas warning systems protect lives and health by monitoring the atmosphere inside any enclosed space and triggering an optical and acoustic alarm, as soon as the concentration of the gas that is being monitored exceeds the preset threshold level.
AMS gas warning systems are based on semiconductor sensors that have proved themselves over the years.
AMS gas warning systems:
Typ P, for monitoring
liquid gas (Propane/Butane) and natural gas (Methane)
Typ C, for monitoring carbon
monoxide (CO) and smoke (fire)
Series camp signal und camp signal S/2
| camp signal | camp signal S/2 | |
|
|
|
| ø 55 mm, |
ø 58 mm, |
The series camp signal model is a self-sufficient warning system
that incorporates the sensor and the acoustic signalling unit in addition
to the semiconductor based electronics.
It is designed to work with a 12 DC current supply.
The series camp signal S/2 model is equipped with an additional switching relay (1 A, 2-way electronic switch) which can trigger any connected device in case of an alarm, e.g. disabling any gas supply by triggering a magnetic valve or turning on an external siren or flashlight.
Areas of use: Caravans, motor homes, boats, holiday home
Series AMS - GASALARM
 H/W/D 100x50x40 mm |
|
A compact reliable device for your safety - Made in Germany - Equipped with
The device operates with an AC current 230 V 50 Hz supply with standard European plug on the rear cover. Just plug in! Warning: Installation height must correspond to gas monitored! |
| Optional models: - equipped with 1.5 m power cable and standard European plug - operates with 12 Volt DC current supply and equipped with 2.0 m cable Areas of use: All living areas, small businesses and holiday homes, motor homes, caravans |
||
Series AMS - GASALARM S/2
 H/W/D 125x140x42 mm |
|
The GASALARM S/2 is a
well equipped easy-to-use gas warning system especially appealing
to the user who wants to incorporate safety and attractive design
into his home.
The device operates with an AC current 230 V 50 Hz supply with standard European plug. |
| Optional model : - operates with 12 Volt DC current supply |
||
Model variation : GASALARM S/2 FS with remote sensor unit
See GASALARM S/2, but equipped with a remote sensor instead of the
built-in sensor unit.
Distance between control unit and remote unit about 20 m, e.g. installation of
the control unit inside the living area, installation of the remote sensor in
the boiler room next to the safety hazard.
Areas of use: Businesses (except
Ex-Hazard areas),
all living areas
Series AMS - GASALARM S/2-F
with integrated radio transmitter
 H/W/D 125x140x42 mm |
|
The proved gas warning system GASALARM S/2 can be optionally equipped with a radio transmitter. When triggered the alarm is not only activated directly on the device itself but is also transmitted to a remote radio receiver. The radio gas alarm can be directly linked to a radio alarm module and/or to a telephone dial and voice recorder module.
Transmission range: up to 100 m depending on building |
| Accessories: | ||
Radio alarm module FAM-S/2 |
||
 H/W/D 100x50x47 mm |
The compact radio alarm module is equipped with
230 V AC / 50 Hz connector on the back of the device. Simply connect to your mains supply and the device will be instantly operational. |
|
Telephone dial and voice recorder module
|
||
 H/W/D 195x140x50 mm |
Sends a message to up to 4 freely programmable phone numbers via the telephone network.
Power supply connection: |
|
Additional information: info@ams-messtechnik.de
top
